Ryuseiken Battodo

Japanese swordfighting

October 2009 Blog Posts (4)

Search Blog Posts

Cutting last week

It might have just been an off-day for folks but from what I saw last weekend, all the candidates for the next black belt level, myself included, do not seem ready for their next test. As cutting criteria again, you need to be proficient in those cuts, which to me means you should be able to do it not just once or twice but pretty much on command 60-90% of the time.



You should not have to think through the cuts but you can certainly do it at a careful pace (slow in between cuts). The… Continue

Added by rawnshah on October 28, 2009 at 8:58am — No Comments

Sharpening

I purchased some sharpening stones from Nihonzashi to try out. They have a fairly large selection of stones from 100 to 8000 grit. This is based on the Japanese grit system, and all the stones are from Japan I believe. I only purchased a 1000/6000 combo stone, and a 3000 grit one, which are better for maintenance not hard core repair. The Japanese grit system is not the same as the US one (quite different actually). There is a conversion chart that I saw somewhere but you will need to be… Continue

Added by rawnshah on October 14, 2009 at 9:20am — No Comments

Next cutting day: Sat 10/24

I'm considering another cutting day on Sat the 24th starting around 9am at Himmel park. It usually goes on till noon. I need responses from people on who can attend and how much goza you need.



We have goza again. As before goza is $6 for a full piece/ $3 for half piece. I plan to cut about 9 goza myself and may have students from the high school class too, so I simply can't soak it all and bring it all in my car. (one plastic tub only fits about 16 before it breaks). For Andrew C and… Continue

Added by rawnshah on October 5, 2009 at 4:44pm — 6 Comments

Peg/stake sharpener and new pegs

I have the new Peg sharpener in and have been making some pegs. Basically, it's cheaper in the long run than buying pre-made pegs for our cutting stand. I went out to Home Depot, got four 1" dowels and had them cut down to size, so now we have 16 possible pegs.





It works like a big pencil sharpener essentially. Blank peg goes in one end and you turn while it planes away the edge. It took me about 15 minutes to do one peg and made my… Continue

Added by rawnshah on October 4, 2009 at 9:04am — No Comments

Latest Blog Posts

Most Popular Blog Posts

Monthly Archives

2023

2013

2012

2011

2010

2009

2008

2007

About

rawnshah created this Ning Network.
Create a Ning Network! »

Web sites & Resources

Matsuri: A Festival of Japan (2008) - Phoenix, AZ, Feb 23-28, Heritage Square

Battodo Ryuseiken in Japan. Also a partial site in english.



The Kodenkan of Tucson



The UofA Ryuseiken Battodo on the ASUA site



Tameshigiri.com - where we get goza. The ordering and shipping process are given.



Hanwei/Paul Chen swords



The Knighthawk Armoury builds some interesting realistic looking goshinken. They're expensive but they claim to be pretty durable (not yet tested by us).



Folding a Hakama the proper way



Woodall's Custom Workshop makes nice cutting stands for tameshigiri.


© 2024   Created by rawnshah.   Powered by

Report an Issue  |  Terms of Service